首頁
慧登
聯絡我們
常見問題
地點
最新消息
參展資訊
合作企業
產業應用
成型機周邊
控制系統
切斷沖孔機構
修端機
卸料架
抛光機
鋼板整平裁剪機
鋼捲分條機
矯直機
放料架 & 立式/臥式料籠
高周波焊機設備
快速交換台
汽車應用
汽車保險桿成型機
汽車門檻成型機
建築應用
鷹架踏板成型機
鐵捲門成型機
三明治版成型機
浪板成形機
C&Z二合一成型機
輕鋼架成型機
金屬支架成型機
傢俱應用
滑軌成型機
窗簾軌成型機
製管機
鋁管製管機
碳鋼管製管機
勾丁管製管機
不鏽鋼管製管機
滾輪
倉儲系統
倉儲架滾輪成型機
太陽能支架成型機
成型產品
English
中文
中文
English
+886-4-828-2884
星期一至星期五 09:00 - 17:00
台灣彰化縣埔心鄉舊館村成功路105號
+886-4-828-2884
Mon - Fri 09:00 - 17:00
台灣彰化縣埔心鄉舊館村成功路105號
+886-4-828-2884
Mon - Fri 09:00 - 17:00
No.105, Chenggong Rd, Puxin Township, Changhua County 513, Taiwan
Ceritified
CE/SGS
The Best
#1 in Taiwan
Number #1
Suplier in region
詢問估價
首頁
慧登
聯絡我們
常見問題
地點
最新消息
參展資訊
合作企業
產業應用
成型機周邊
控制系統
切斷沖孔機構
修端機
卸料架
抛光機
鋼板整平裁剪機
鋼捲分條機
矯直機
放料架 & 立式/臥式料籠
高周波焊機設備
快速交換台
汽車應用
汽車保險桿成型機
汽車門檻成型機
建築應用
鷹架踏板成型機
鐵捲門成型機
三明治版成型機
浪板成形機
C&Z二合一成型機
輕鋼架成型機
金屬支架成型機
傢俱應用
滑軌成型機
窗簾軌成型機
製管機
鋁管製管機
碳鋼管製管機
勾丁管製管機
不鏽鋼管製管機
滾輪
倉儲系統
倉儲架滾輪成型機
太陽能支架成型機
成型產品
鋼捲分條機
首頁
產業應用
成型機周邊
鋼捲分條機
1. By means of Programmable Logic Controller(PLC),system performance is based upon the characteristics of various Metal sheets, and switches High/Low speed operating mode automatically, so as to achieve improved efficiency and reduced maintenance probability.
2. For lower malfunctioning,the material uncoiler uses an expand/shink hydraulic cylinder that is mounted on an integrated steel frame.
3. The uncoiler is equipped with a high efficiency disc type brake,its tension is adjusted by the air-pressure loop. Under this circumstance, the time for tension adjustment is reduced,also ,the forced monetary braking is occurred thus free from loosen of coil.
4. The pre-loader is equipped with DC various-speed motor drive, so that a synchronized speed cooperate to the production line could be governed.
5. Slitting Knives are mounted on an integrated frame with a separated transmission, that means enhanced rigidity structure of machine, lower vibration amplitude of Knives, and excellent yields could be produced.
6. The datum plane and accuracy of Slitting Knives' axes are all to be fabricated with in 0.006mm. in tolerance, so that makes higher duration of Slitting Knives and much excellent accuracy of outputs of the Slitting Line.
7. For securing the stability of Slitting Line during operation, the tension controlled roll-up device with slip-differential structure is designed for the waster.
8. The vertical of tension pad uses high elastics and resistive woolen pads as surface materials, so keep the outputs of the line smoother. In addition,it also equipped a pressure-balance device to keep an even-pressure over the both sides of materials that touched with the tension pad.
9. The recoiler is equipped with an improved/ high rigid holder, that causes reduce of lead time. An air-pressure adjustable back-pressure device is equipped on the separator mechanism, so that a constant hold-pressure could be reached for recoil.
10. Self-tension design enables to retain a better tightness during recoil. Automatic Steel Sheet Slitting Machine
聯絡我們